Takeoff software, by trade
Every trade measures differently — counts and cable for electrical, both board faces for drywall, pitch-adjusted area for roofing. Here's what each takes off, and how to do it on a PDF.
Compare the takeoff tools that run on macOS, the Windows-only packages that need a VM, and the browser-based route that needs no install.
- Plasterboard & drywall takeoff software
Plasterboard (drywall) takeoff from a PDF: partition runs (m) for track and studs, board area (m²) both faces, ceilings and insulation — then export for your estimate. Free to start.
- Electrical takeoff software
Electrical takeoff from a PDF: count sockets, switches, lights and points, and measure cable, tray, trunking and conduit runs. Browser-based, free to start.
- Flooring takeoff software
Flooring takeoff from a PDF: measure room areas (m²) by finish, get perimeters for trim/skirting, deduct fixed units and add pattern waste. Free to start.
- Painting & decorating takeoff software
Painting takeoff from a PDF: wall area (perimeter × height less openings), ceilings, trim in metres, coats and coverage. Browser-based, free to start.
- Concrete takeoff software
Concrete takeoff from a PDF: slab and foundation volume (m³ = area × thickness), footings and beams, formwork area and rebar. Browser-based, free to start.
- Roofing takeoff software
Roofing takeoff from a PDF: convert plan area to true sloped area with a pitch factor, measure ridge/hip/valley/eaves, tiles, battens and flashings. Free to start.